Moving a shipping container to acreage in the Lockyer Valley: what to check first
A shipping container is one of the most useful things you can put on an acreage block. It becomes a lockable shed, a workshop, feed storage or a site office. Getting it from the depot or seller to the right spot on your property is usually simple, but only if a few things are sorted before the truck arrives. This guide walks through what to check first, based on the kinds of properties we see across Gatton, Laidley, Plainland, Hatton Vale and the rest of the Lockyer Valley.
1. Know the container size and where it's coming from
Start with the basics: the container's length (most acreage containers are 20ft), whether it's a standard or high-cube container, and its condition. Also tell us whether it's empty. A loaded container is much heavier, and in many cases it needs to be emptied before it can be moved safely.
Next, the pickup. Containers bought new or used usually come from a depot around Brisbane, Ipswich or Toowoomba, or from a private seller. Depots normally load the container onto the truck with a forklift or crane. At a private address we load with the tilt tray, so the same access checks below apply at the pickup end as well.
2. Walk the route from the road to the drop spot
The truck needs to get from the road all the way to where the container will sit, then line up straight and have room to tilt the tray and slide the container off. Walk the route yourself and look for anything that could stop it.
- Gate width — narrow farm gates are the most common problem. Measure it.
- Overhead power lines, phone lines and low branches along the driveway and over the drop spot. The tray rises as it tilts, so overhead clearance matters most right where the container comes off.
- Tight corners, culverts and cattle grids that may not take the weight of a loaded truck.
- Steep slopes or side slopes on the driveway.
- Room behind the drop spot — the truck needs space in front to drive forward as the container slides off the tray.
3. Check the ground, especially after rain
This is the big one in the Lockyer Valley. A lot of the valley is heavy black soil that looks firm when dry but turns soft and slippery after rain. A loaded truck on wet ground can sink quickly, and a bogged truck means a delayed delivery and possible damage to your paddock.
If there's been heavy rain in the days before your delivery, it's often worth waiting until the ground has dried out. If you're unsure, take a photo of the track and the drop spot and send it to us. We'd rather move the date than risk getting stuck.
4. Prepare a level base
A container should sit level and off the soil so the doors open and close properly and the floor doesn't rot. Common options are compacted road base, concrete pads or sleepers under each corner. Have the base ready before moving day so the container can go straight onto it.
Also think about door direction. Decide which way you want the doors facing before the truck arrives. The container comes off the tray in the direction the truck is facing, so turning it around afterwards isn't easy.
5. Check council rules
Some councils treat a shipping container used as a shed as a structure, with rules about size, placement and setbacks from boundaries. Rules differ between areas and change over time, so check with your local council (Lockyer Valley, Somerset, Ipswich or Toowoomba, depending on where you are) before you buy and place a container.
6. What to send us for a quote
With these details we can tell you whether the job suits our truck and give you a price before we head out.
- Container size and whether it's empty
- Pickup address (depot or private seller)
- Drop-off address and where exactly it should sit
- Gate width, overhead lines and anything tight on the way in
- Photos of the driveway and drop spot, if you can
- Which way the doors should face
On the day
Be there if you can, so you can confirm the exact spot and door direction. Keep kids, pets and stock away from the truck while it's tilting and unloading. Once the container is down, check that it's sitting level and the doors open and close freely before the truck leaves.
Moving a container somewhere else in South East Queensland? The same checks apply whether it's going to Toowoomba, Ipswich or Brisbane. Call us on 0434 810 090 or send the quote form and we'll give you a price.
Need a hand?
We answer 24/7. Call or SMS and we'll give you a price before we send the truck.
